My 350 Vento

[SamC]

Unlike the Italian Desmos, the Vento uses a Brembo PS12 master cylinder.

OK thank you
PS12 front the front and the rear ?

The calipers are PS5.

P05


I'm going to look at where to order the parts to rebuild the brakes.

[Jon Pegler]

Corrected the PO5 line.
PS12 calipers front and rear.

Jon

[SamC]

Thanks Jon


This evening I went to Renault to order valve seals for Clio 2 1.9D

[Ventodue]

En réponse à 4), oui vous faites - "handlebar grips"

Y 'juego de puños' en espagnol!

Sam, they seem to be readily available. Try, for example:

http://www.motoretro.es/dug1-pareja-puo ... vf8ajdp7b0

or:
https://motosluis.com/tienda/index.php? ... er=product

or:
https://recambiomotosclasicas.com/otras ... ucati.html

[Rocla]

Hello, I see that there are a lot of French in this forum! I am in Toulouse, I have a Scrambler. Best regards!

[SamC]

Great an other frenchman !



While waiting to start work on this bike I buy parts

Today I will order all the bearing but I forgot to look at tje references ans quantities for the wheels ! Do you have that ?
Otherwise it will wait until this weekend that I disassemble

[Jon Pegler]

Front wheel bearings are 6004 2RS x2
Rear wheel bearings are 6203 2RS x2
Cushdrive hub 6204 2RS x2

Jon

[SamC]

Thanks Jon !