Scrambler seat 250 N / C.

[elmoi11]

Hello.

I have found this photo on Ebay, which shows better the arch of the chassis, where the seat rests.
I asked the seller, if he would be so kind as to tell me the measurements of the bow in centimeters. But the seller has refused.

Does anyone have a chassis like the one in the photo, a 250 Scrambler N/C 67', who can tell me the measurements of the arch, where the seat rests.

Thank you all.
Moises.

[double diamond]

The loop is about 92mm centerline radius. It is not quite 180 degrees, maybe 170 degrees. The top of the loop is about 85mm above the frame rails. The attachment to the frame is about half welded to the shock mount and half to the frame rail.

Matt

[elmoi11]

Hello.

Thank you very much Matt.
It is what I needed, this weekend, with my chassis I will transfer your measurements and I will try to draw it.

Thanks.
Moises.