I’ve still got both mudguards, although I don’t know if they are right for your bike as I have 18” wheels. Also can’t remember what state the front is in.
If you have no joy, ask me again. Will probably be having a trip to Essex (Harwich) at some point as my parents are there.
Ian
175TS with 125S engine project
Moderator: ajleone
-
- Posts: 474
- Joined: Sun Jun 04, 2017 11:33 am
- Location: Stafford UK
-
- Posts: 428
- Joined: Fri Feb 14, 2020 2:51 am
- Location: Essex UK
Re: 175TS with 125S engine project
ranton_rambler wrote:I’ve still got both mudguards, although I don’t know if they are right for your bike as I have 18” wheels. Also can’t remember what state the front is in.
If you have no joy, ask me again. Will probably be having a trip to Essex (Harwich) at some point as my parents are there.
Ian
Thanks for the reply Ian. Spoke to panel beater today and he can repair the mudguard. some good news at last, onward and upward.
George S Essex UK
-
- Posts: 428
- Joined: Fri Feb 14, 2020 2:51 am
- Location: Essex UK
Re: 175TS with 125S engine project
Bit of an update. Aches and pains going, visit to physio next week.
I have acquired an Italian type B frame, forks and 200cc engine that I intend to restore and swap parts from damaged bike to make one good one.
Not sure if I am boring everyone but if there is any interest I could start a new topic on rebuild.
I now have a rebuilt 125 engine complete with Amal monobloc 375 / 20 and exhaust system for sale. If interested PM me for details and photos
Click link to hear it running
https://www.youtube.com/watch?v=aT-56Z4 ... MA&index=2
I have acquired an Italian type B frame, forks and 200cc engine that I intend to restore and swap parts from damaged bike to make one good one.
Not sure if I am boring everyone but if there is any interest I could start a new topic on rebuild.
I now have a rebuilt 125 engine complete with Amal monobloc 375 / 20 and exhaust system for sale. If interested PM me for details and photos
Click link to hear it running
https://www.youtube.com/watch?v=aT-56Z4 ... MA&index=2
George S Essex UK
-
- Posts: 742
- Joined: Sat Jun 14, 2014 12:44 am
- Location: Scotland
Re: 175TS with 125S engine project
Aye George,
Not boring at all George. A new topic, I am sure would be appreciated.
Pleased to read that the aches and pains are going and you are walking less like a gunslinger. Do exactly as the physio says, without one, I doubt if I would be starting the 450. And a good sports masseure to get rid of the knots out of the muscles.
Good health and success with the sale of the 125 engine and carb.
Bill
I have acquired an Italian type B frame, forks and 200cc engine that I intend to restore and swap parts from damaged bike to make one good one.
Not sure if I am boring everyone but if there is any interest I could start a new topic on rebuild.
Not boring at all George. A new topic, I am sure would be appreciated.

Pleased to read that the aches and pains are going and you are walking less like a gunslinger. Do exactly as the physio says, without one, I doubt if I would be starting the 450. And a good sports masseure to get rid of the knots out of the muscles.
Good health and success with the sale of the 125 engine and carb.
Bill
-
- Posts: 1450
- Joined: Wed Feb 05, 2020 1:20 pm
- Location: Essex UK
Re: 175TS with 125S engine project
Hi George,
We would love to hear about your new project, and full marks to you for having the spirit for another go, it must be heartbreaking to start again after finishing the last one. Glad that you are recovering OK.
Colin
We would love to hear about your new project, and full marks to you for having the spirit for another go, it must be heartbreaking to start again after finishing the last one. Glad that you are recovering OK.
Colin
-
- Posts: 215
- Joined: Mon Mar 30, 2015 11:29 pm
Re: 175TS with 125S engine project
Good to hear you are on the mend George. Reading about your Phoenix project will certainly be far from boring.
Brian
Made in England
Made in England
-
- Posts: 428
- Joined: Fri Feb 14, 2020 2:51 am
- Location: Essex UK
Re: 175TS with 125S engine project
I Have started a new post of second rebuild and shall now close this topic. Hoping for better luck next time.
New topic viewtopic.php?f=3&t=3327
New topic viewtopic.php?f=3&t=3327
George S Essex UK
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: Google [Bot] and 54 guests