Mach 1 - Mark 3 seat question

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

kaysystems
Posts: 81
Joined: Mon Jan 14, 2013 1:57 pm
Location: Charlottetown, PEI, Canada

Mach 1 - Mark 3 seat question

Postby kaysystems » Tue Jan 12, 2021 1:08 pm

I have a question regarding a "Mach 1 " seat I acquired some time ago.
To me, it looks like the rear mounting brackets are too long. Are they? They also have two sets of mounting hole.
Picture attached, compared to a Narrowcase Mark 3 seat.

Thanks in Advance

David
You do not have the required permissions to view the files attached to this post.
1967 Narrowcase 250
2004 Ducati ST3

nalimugmug
Posts: 126
Joined: Mon Sep 12, 2011 3:40 pm
Location: South Glos UK

Re: Mach 1 - Mark 3 seat question

Postby nalimugmug » Tue Jan 12, 2021 2:43 pm

Hi,

A couple of pics for you to compare of an original M1 seat.

Cheers

Bob
20210112_143113.jpg
20210112_143029.jpg
You do not have the required permissions to view the files attached to this post.

Bevel bob
Posts: 1099
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: Mach 1 - Mark 3 seat question

Postby Bevel bob » Tue Jan 12, 2021 4:24 pm

We bought a brand new mach1 from Vic Camp . It came with a seat with no rear hump. It also came with a Smith RC mounted on the crank and a remote float chamber.

kaysystems
Posts: 81
Joined: Mon Jan 14, 2013 1:57 pm
Location: Charlottetown, PEI, Canada

Re: Mach 1 - Mark 3 seat question

Postby kaysystems » Fri Jan 15, 2021 12:26 am

Thanks.

This looks
Like the seat I have!

Cheers

David
1967 Narrowcase 250
2004 Ducati ST3


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 45 guests