Hello,
My '74 -'75 450 Scrambler is a bit of a dunga but a good bike.
I sorted it enough over the years to be reliable and a very pleasant ride.
I have replaced the single sided drum with the correct double sided brake and new twin cables etc.
How are the cables supposed to rout ?
All works well but the cables are over the gauges.
Is it just that the bars aren't high or long enough?
It has been like this for a long time, so it's no big deal if there is no answer.
Graeme
Late Scrambler brake cable position
Moderator: ajleone
-
- Posts: 1006
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
Late Scrambler brake cable position
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1450
- Joined: Wed Feb 05, 2020 1:20 pm
- Location: Essex UK
Re: Late Scrambler brake cable position
I can't tell from your picture, but the bars look not to be original. The original Scrambler bars were very wide and may account for the excess cable that you have.
-
- Posts: 604
- Joined: Tue May 22, 2012 12:52 pm
- Location: near Frankfurt, Germany
Re: Late Scrambler brake cable position
A new find: https://www.ducatibrochures.com/the-collection-per-type-or-year/bevel-singles-from-250/
An enormous collection of scanned Ducati brochures, with a lot of pictures/fotos of the SCR model among them.
These here might help:

Hans
An enormous collection of scanned Ducati brochures, with a lot of pictures/fotos of the SCR model among them.
These here might help:


Hans
-
- Posts: 1006
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
Re: Late Scrambler brake cable position
Thank you gentlemen, I thought the longer bars would help.
What about the blue and gold m3 ?
They had shorter bars I thought ?
What about the blue and gold m3 ?
They had shorter bars I thought ?
-
- Posts: 1450
- Joined: Wed Feb 05, 2020 1:20 pm
- Location: Essex UK
Re: Late Scrambler brake cable position
Yes, definitely. I wonder if they would fit your bars? Have you asked Phil at Road and Race? Alternatively, Lacey Ducati sells universal front brake cables that can be cut to size.
-
- Posts: 960
- Joined: Mon Mar 08, 2010 3:23 pm
- Location: Montpellier, France
Re: Late Scrambler brake cable position
Sorry, Graeme. Meant to get back to you on this, then forgot ... Mea culpa.
Anyways, hope the attached helps. 450 SCR, btw.
Anyways, hope the attached helps. 450 SCR, btw.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1006
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
Re: Late Scrambler brake cable position
Looks nice and neat
Are the bars standard Scrambler?
On my picture you will see how close the dual cable attaches to the brake lever is to the gauges.
These aren’t standard bars obviously and the cables can’t bend that tight to run the cables same as yours.
I can see how the cables run with your bars, thank you for showing me a picture.
But what about Mk3 blue and gold bikes? They had the same set up but with shorter bars than Scramblers?
Graeme
Are the bars standard Scrambler?
On my picture you will see how close the dual cable attaches to the brake lever is to the gauges.
These aren’t standard bars obviously and the cables can’t bend that tight to run the cables same as yours.
I can see how the cables run with your bars, thank you for showing me a picture.
But what about Mk3 blue and gold bikes? They had the same set up but with shorter bars than Scramblers?
Graeme
-
- Posts: 960
- Joined: Mon Mar 08, 2010 3:23 pm
- Location: Montpellier, France
Re: Late Scrambler brake cable position
graeme wrote: <snip> Are the bars standard Scrambler?
Probably be best if I put it this way

graeme wrote:But what about Mk3 blue and gold bikes? They had the same set up but with shorter bars than Scramblers?
Hopefully an owner will be along soon. In the meanwhile, there's this photo in Massimo Clarke's book which, from what I can make out, has the brake cable passing behind the headlamp to emerge from behind the left stanchion.
You do not have the required permissions to view the files attached to this post.
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 43 guests