Looking at the camshaft in my 250 - I can see that it is hollow, and there is a roll pin (pasador elastico) pushed in to the end at the bevel drive side.
Doesn't seem to do anything apart from act as a restrictor of some kind.
Does anyone know what it is for?
Roll pin in camshaft
Moderator: ajleone
-
veloduke
- Posts: 180
- Joined: Sat Jul 27, 2019 5:16 pm
- Location: Glos UK
Roll pin in camshaft
Cheers
Max
Max
-
Rhys
- Posts: 12
- Joined: Sat May 18, 2013 5:57 pm
Re: Roll pin in camshaft
Hi, My 350 cam is the same. The Vento has an oil pressure light on the dash, and a pressure switch through the cam carrier. I am uncertain, but I believe it`s purpose is to create enough back-pressure to activate the pressure switch. Probably has the secondary benefit of forcing oil onto the rockers.
Cheers!
Cheers!
-
Bevel bob
- Posts: 1097
- Joined: Thu Apr 15, 2010 8:01 am
- Location: Bromley Kent UK.
Re: Roll pin in camshaft
Its a fairly common fitment to force a bit more oil to the cam lobes. The bevel gears get a fair amount of oil from splash and through the bearing and are so long lived that they don't need the open oilway. I did mine many years ago and it works well.
-
veloduke
- Posts: 180
- Joined: Sat Jul 27, 2019 5:16 pm
- Location: Glos UK
-
linker48x
- Posts: 24
- Joined: Thu Aug 29, 2019 11:41 am
Re: Roll pin in camshaft
I assume the hole is 5mm--do people use a 3/16 roll pin (which is MUCH easiser to find), or ??
-
Jordan
- Posts: 1470
- Joined: Fri Dec 24, 2010 11:29 am
Re: Roll pin in camshaft
You could press or Loctite in a short piece of 5mm rod with a hole in it, or a flat filed onto its side?
-
Gianni
- Posts: 48
- Joined: Thu Dec 01, 2016 1:57 am
- Location: Prescott, Arizona
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 51 guests