Double sided drum brake speedo drive.

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

graeme
Posts: 1006
Joined: Sun Mar 25, 2012 12:00 am
Location: Tasmania Australia

Double sided drum brake speedo drive.

Postby graeme » Fri Jun 17, 2016 9:49 pm

Is the speedo drive for single sided drum the same as for the double sided drum?
I have a double sided hub from a late Scrambler that is missing the speedo drive.
I'm not sure if the worm gear is the same gear fitted to the single sided hub.
Graeme

ajleone
Posts: 230
Joined: Sat Oct 31, 2009 11:20 pm
Location: Pittsford, NY
Contact:

Re: Double sided drum brake speedo drive.

Postby ajleone » Sat Jun 18, 2016 11:14 am

Yes, speedo drive is on the right side for the double hub same as the single sided hubs. Here's some pics, unfortunately I don't have any close ups.
http://www.coolitalianbikes.com/ducati-450-scr
Tony

amartina75
Posts: 347
Joined: Tue Aug 21, 2012 1:13 am
Location: Cincinnati, OH. USA

Re: Double sided drum brake speedo drive.

Postby amartina75 » Sat Jun 18, 2016 2:11 pm

According to ducaticlassics.com they are the same part number. When I don't have the parts book I need or am away from home I check that website. It's almost as good as having the parts book. I wish all Ducati parts websites were as easy to use.
Just make sure the drive shaft is for the right size rim 18 or 19 inch. I don't remember the numbers on them which is which, but I could figure that out if you need.
http://www.ducaticlassics.com/Parts/Model/250,%20350%20and%20450%20Desmo/68-74WD33/

Hope that helps,
Aaron
1966 250 Scrambler
1970 450 Jupiter

graeme
Posts: 1006
Joined: Sun Mar 25, 2012 12:00 am
Location: Tasmania Australia

Re: Double sided drum brake speedo drive.

Postby graeme » Sat Jun 18, 2016 10:03 pm

Thank you both very much.
Regards
Graeme


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: A.I.M and 67 guests