Monza Junior 160 Output Sprocket
Moderator: ajleone
-
- Posts: 8
- Joined: Fri Mar 18, 2016 12:20 am
Monza Junior 160 Output Sprocket
Hello, I have been riding and building bikes all of my life, this is the first Ducati I have owned. it is about half of a 66 Monza Junior and I have a question: is the output sprocket (front sprocket) the same as the 250 and larger singles?
-
- Posts: 805
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: Monza Junior 160 Output Sprocket
dont know about the 160 cc but the 125 uses a 420 chain and the 175 thru 350 cc uses a 428 chain . pitch is the same on both sprockets but the 420 item is smaller . a 428 sprocket would fit a 125 tho .
Eldert
Eldert
-
- Posts: 8
- Joined: Fri Mar 18, 2016 12:20 am
Re: Monza Junior 160 Output Sprocket
thanks, the 160 is supposed to be an overbored 125 so I think the bottom ends should be the same
-
- Posts: 805
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: Monza Junior 160 Output Sprocket
the splines on the outputshaft are al the same . you can fit a 420 , 428 or a 450 's 530 sprocket .
they al fit .
Eldert
they al fit .
Eldert
-
- Posts: 8
- Joined: Fri Mar 18, 2016 12:20 am
Re: Monza Junior 160 Output Sprocket
Thanks, that's what I needed to know
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 97 guests