Specialty Tool List?

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Forum rules
Post Reply
howlndog
Posts: 39
Joined: Sat Jan 30, 2016 3:31 am
Location: Winnipeg, Canada

Specialty Tool List?

Postby howlndog » Mon Feb 29, 2016 7:25 pm

As I am about to start putting together a '70 350 Mark 3, are there any "must have" tools I should acquire?
Derek
'70 350 Mark 3D
Top
Ventodue
Posts: 960
Joined: Mon Mar 08, 2010 3:23 pm
Location: Montpellier, France

Re: Specialty Tool List?

Postby Ventodue » Tue Mar 01, 2016 1:49 pm

howlndog wrote:As I am about to start putting together a '70 350 Mark 3, are there any "must have" tools I should acquire?

1. Exhaust nut spanner. Various models, but this is the original design. Do NOT try using anything else.

Image

2. Clutch locker. This locks up the engine so you can undo/do up various nuts - cam, crank, clutch. Here you can do better than the original tool(s) by getting a combined tool that locks both the drum and the centre:

Image

3. Flywheel puller, if you need to remove the alternator rotor. Make sure you get the right size: 62mm thread for the wide-cases:

Image

HTH

Craig
Top
howlndog
Posts: 39
Joined: Sat Jan 30, 2016 3:31 am
Location: Winnipeg, Canada

Re: Specialty Tool List?

Postby howlndog » Tue Mar 01, 2016 5:09 pm

Craig - excellent, thank you.

derek
Derek
'70 350 Mark 3D
Top
Post Reply

Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: Google [Bot] and 101 guests