Bob,
Thanks for the explanation on the wilder cams effect on compression ratio. Took me several reads, but I've got it now!
I've access to a 350WC compression release mechanism. I did a trial fit on my engine, and it physically fits. What is it about the WC CR mechanism that makes it unsuitable for the NC? I suspect it's related to the CR "pin" and its location against the rocker arm, but I'm looking for confirmation (I don't have the valves installed on the bike).
Mike
Not a good weekend... 350 NC dis-assembly
Moderator: ajleone
-
SebringMike
- Posts: 37
- Joined: Sun Nov 02, 2014 5:43 pm
Re: Not a good weekend... 350 NC dis-assembly
2004 BMW R1100S, 1986 Kawasaki ZX750R, 1982 Piaggio PX125E, 1979 Ducati Regolarita
1971 Kawasaki H1A, 1970 Yamaha XS1, 1970 Yamaha R5, 1969 Honda CB750K0
1965 Ducati Sebring
1971 Kawasaki H1A, 1970 Yamaha XS1, 1970 Yamaha R5, 1969 Honda CB750K0
1965 Ducati Sebring
-
DewCatTea-Bob
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: Not a good weekend... 350 NC dis-assembly
[quote= SebringMike ...
" What is it about the WC CR mechanism that makes it unsuitable for the NC? I suspect it's related to the CR "pin" and its location against the rocker arm, "
____ It's been since the '70s when I once encountered the interchangeability issue, so I'm no-longer really for certain,, but think I recall that the w-c.plunger-pin was too-long (and-so I had to grind it down between 2~4mm), but seems like there was some-other components issue involved as well.
Hopeful-Cheers,
-Bob
" What is it about the WC CR mechanism that makes it unsuitable for the NC? I suspect it's related to the CR "pin" and its location against the rocker arm, "
____ It's been since the '70s when I once encountered the interchangeability issue, so I'm no-longer really for certain,, but think I recall that the w-c.plunger-pin was too-long (and-so I had to grind it down between 2~4mm), but seems like there was some-other components issue involved as well.
Hopeful-Cheers,
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 75 guests