Monza Junior 160 Output Sprocket

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Honduc
Posts: 8
Joined: Fri Mar 18, 2016 12:20 am

Monza Junior 160 Output Sprocket

Postby Honduc » Tue Mar 29, 2016 9:54 pm

Hello, I have been riding and building bikes all of my life, this is the first Ducati I have owned. it is about half of a 66 Monza Junior and I have a question: is the output sprocket (front sprocket) the same as the 250 and larger singles?

Eldert
Posts: 805
Joined: Sun Nov 01, 2009 3:23 pm
Location: Hazerswoude Rijndijk Netherlands

Re: Monza Junior 160 Output Sprocket

Postby Eldert » Wed Mar 30, 2016 5:31 am

dont know about the 160 cc but the 125 uses a 420 chain and the 175 thru 350 cc uses a 428 chain . pitch is the same on both sprockets but the 420 item is smaller . a 428 sprocket would fit a 125 tho .

Eldert

Honduc
Posts: 8
Joined: Fri Mar 18, 2016 12:20 am

Re: Monza Junior 160 Output Sprocket

Postby Honduc » Wed Mar 30, 2016 8:58 pm

thanks, the 160 is supposed to be an overbored 125 so I think the bottom ends should be the same

Eldert
Posts: 805
Joined: Sun Nov 01, 2009 3:23 pm
Location: Hazerswoude Rijndijk Netherlands

Re: Monza Junior 160 Output Sprocket

Postby Eldert » Wed Mar 30, 2016 9:14 pm

the splines on the outputshaft are al the same . you can fit a 420 , 428 or a 450 's 530 sprocket .
they al fit .

Eldert

Honduc
Posts: 8
Joined: Fri Mar 18, 2016 12:20 am

Re: Monza Junior 160 Output Sprocket

Postby Honduc » Thu Mar 31, 2016 6:58 pm

Thanks, that's what I needed to know


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: IanHood and 112 guests