What Duc is this?

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Teckhardt
Posts: 394
Joined: Sat Oct 31, 2009 10:25 pm
Location: Pacifc Northwet USA

What Duc is this?

Postby Teckhardt » Sat Feb 27, 2010 6:25 pm

Saw this on another board. What is it? Looks like a parallel twin.

Image

Image
1970 450 SCR

DewCatTea-Bob
Posts: 2897
Joined: Sun Nov 01, 2009 10:53 am
Location: Near SE side of Lake Michigan

Re: What Duc is this?

Postby DewCatTea-Bob » Sat Feb 27, 2010 7:07 pm

" What is it? Looks like a parallel twin. "

____ Yes it does indeed look like one of the late '70s 350/500 vert.twins but,, while I don't think I've ever seen that particular body-work before, it's engine reminds me of the '350-Utah' (single-cyl)...
Ducati was supposed to produce them back around the early '80s, but I didn't think they ever did. _ Sure wish they had!
Wish I could remember the Utah's bore_&_stroke! _ It was more oversquare than our old-350s! - I'm sure it's piston is too wide to fit in an old 350-cylinder, (yet still smaller than our old-450's piston), I'm thinking it was 83mm-bore & 64.5mm-stroke. - (Same stroke as the 750 bevel-twins which ran with 450-sized pistons! -[86 instead of 80mm].)
__ While I'm not sure if this Duc pictured, was a GT350/500 or a 'Sport' model, I can tell ya the B_&_S of the 350-twin was 72x42mm, and the 500-twin was 78x52mm. _ At the time when Ducati's vert.twins were released in 1977, they then took-over the title of having the most oversquare cycle-engines ever made! - (Taking that title away from Benelli's 650-twin, which had a B_&_S of 84x57.8mm -[same stroke as the 250-single!].)


DUCATI-Cheers,
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob

Teckhardt
Posts: 394
Joined: Sat Oct 31, 2009 10:25 pm
Location: Pacifc Northwet USA

Re: What Duc is this?

Postby Teckhardt » Sun Feb 28, 2010 3:44 am

Based on what I am reading in my copy of Ian Falloon's Standard Catalog of Ducati Motorcycles, I am guessing its a 78-81 500 GTV (maybe a 350). The gold speedline wheels and the kickstart are from that era.

Would hate to try to find parts of one of these... :shock:
1970 450 SCR

wcorey
Posts: 323
Joined: Sun Jan 31, 2010 1:50 am
Location: MA USA

Re: What Duc is this?

Postby wcorey » Sun Feb 28, 2010 4:05 pm

I like the way it's set up, first one I've seen that's 'acceptable' to my sense of style. Definitely a 500, the fins on the cylinder are noticeably wider than on the 350's.
Could have started out as an '83 500 sport, for some reason they made a small run of them for the aussie market after they were out of production for a couple years.
That was the the only model that came with oscam wheels, and I think the only one with the double downtube frame.
I guess marketing killed them more than anything, the company was more known for singles/vtwins, they just never got popular and were as expensive as an 860GTS. Supposedly the chain driven valve gear was a common source of failure and they had somewhat tepid power particularly on the early models, though reviews had the handling as a strong point.


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 21 guests