30mm Dellorto PHBH jetting for 200 SS/Elite

[JimLardassian]

I am looking for advice from anyone who has fitted a 30mm PHBH to a 200 SS/Elite regarding a starting point for jetting. Bike has a factory long megaphone fitted. Thanks.

[Bevel bob]

If this is a road bike I would say its too big to be usefull.

[Duccout]

Hi Jim,

I think that you will struggle to find info. The 239 Single used a 30mm Dell'Orto, so maybe you could start from there?

The settings are: Needle K3; Main Jet 125; Pilot Jet 65; Slide 50/3; Needle Jet 265AB.

Let us know how you get on.

Colin

[JimLardassian]

Thank you Colin, that's exactly what I needed, a starting point.

[BevelBitsaBrighton]

You can buy the carb set up for Ducati singles from dellorto.co.uk Mike worked out of the box (on a mach1).

[JimLardassian]

Thanks for the reply, I am slightly confused by it however. Are you saying that Mike (sorry, I'm new to the forum, so do not know who he is) is selling carb set-up information for a Mach 1, or that Dellorto in the UK sells a carb that is set up for a Ducati single (in this case a Mach 1).

In either case do you have a link you could provide. I couldn't find either when I went to dellorto.co.uk

Thanks for your help, really appreciate it

[JimLardassian]

Sorry forgot to include that I also have a Mach 1, so this would be useful informantion.

Thanks

[themoudie]

Aye Jim,

Here is the link to Eurocarb Ltd, home page, who are the Dellorto carburettor specialists in the UK.

Eurocarb_(Dellorto_suppliers_UK)

I have used Eurocarb for genuine Dellorto spare parts, when rebuilding and tuning the carburettor on a Moto Morini 125H. Sound advice and very helpful, but Dellorto prices can be eye watering.

Good health, Bill