First Ducati

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

graeme
Posts: 938
Joined: Sun Mar 25, 2012 12:00 am
Location: Tasmania Australia

Re: First Ducati

Postby graeme » Mon Apr 16, 2018 8:07 am

From what I’ve seen and owened in Australia the last casting were all 46———- serial numbers and all 1974, disc brake yellow bikes or late Scramblers with double sided drums.
Also the blue and gold m3
Only 450’s
It would be interesting to know the serial number these started from.
All the 1973 bikes were the earlier narrow bolt castings. That I’ve seen anyway .

Graeme

Roberto
Posts: 15
Joined: Sat Apr 07, 2018 12:13 pm

Re: First Ducati

Postby Roberto » Mon Apr 16, 2018 10:20 am

20180414_180038.jpg
You do not have the required permissions to view the files attached to this post.

graeme
Posts: 938
Joined: Sun Mar 25, 2012 12:00 am
Location: Tasmania Australia

Re: First Ducati

Postby graeme » Mon Apr 16, 2018 12:05 pm

Roberto, that engine looks to be in good condition
You might have a good one.
But you won’t know for sure until you decide if you are going to build a 350 and look inside.

Ventodue
Posts: 952
Joined: Mon Mar 08, 2010 3:23 pm
Location: Montpellier, France

Re: First Ducati

Postby Ventodue » Mon Apr 16, 2018 12:29 pm

graeme wrote:From what I’ve seen and owned in Australia the last casting were all 46———- serial numbers and all 1974, disc brake yellow bikes or late Scramblers with double sided drums. Also the blue and gold m3. Only 450s .


Hi Graeme,

As Hans suggested, I reckon it could have been the 250s and 350s also:

Ian's Book of the Ducati Overhead Camshaft Singles has photos of both a 250 and a 350 Desmo engine with wider bosses at the front of the engine (page 250). The caption of the 350 photo dates it as 1974. The 250 caption isn't specific, however - could be '73 or '74.

Massimo Clarke has a photo of a 350 Desmo with wide front bosses, but it's not dated (page 47). But the bike's a drum brake model - which I think is 1973? He also shows a 250 Mark 3 (page 54). But again no help on the year - it's only labelled as "1973/4".

Ciao

Craig

Ventodue
Posts: 952
Joined: Mon Mar 08, 2010 3:23 pm
Location: Montpellier, France

Re: First Ducati

Postby Ventodue » Mon Apr 16, 2018 12:39 pm

Guys,

Trivia, I know but ...

Is it just me, or does Roberto's engine seem to have a particularly pronounced thickening here? Neither of my singles has anything similar, nor do I see it on any photos ... except on 1968 models.

Ciao

Craig
You do not have the required permissions to view the files attached to this post.

Eldert
Posts: 771
Joined: Sun Nov 01, 2009 3:23 pm
Location: Hazerswoude Rijndijk Netherlands

Re: First Ducati

Postby Eldert » Mon Apr 16, 2018 6:46 pm

graeme wrote:If this engine is 450,,,
The very last series had wider spaced bolts forward and rear of the cylinder opening in the cases.
The serial number for these was 46———— (I don’t know what number this case change started)



Regards
Graeme


i have a 450 engine with engine nr 460754 and it still has the narrower bolt spacing .

Eldert

Ventodue
Posts: 952
Joined: Mon Mar 08, 2010 3:23 pm
Location: Montpellier, France

Re: First Ducati

Postby Ventodue » Mon Apr 16, 2018 7:09 pm

Any idea what year that might be, Eldert? 1973 or 74?

Jordan
Posts: 1380
Joined: Fri Dec 24, 2010 11:29 am

Re: First Ducati

Postby Jordan » Mon Apr 16, 2018 8:52 pm

With regard to narrow or wide bolt spacing, on either side of the crankcase mouth:
A long time ago I saw the insides of two engines, that I'm pretty sure were both 450s.
One had hollow dowels at the bolt locations either side of the mouth, the other had them located elsewhere.

Eldert
Posts: 771
Joined: Sun Nov 01, 2009 3:23 pm
Location: Hazerswoude Rijndijk Netherlands

Re: First Ducati

Postby Eldert » Tue Apr 17, 2018 9:29 pm

Eldert wrote:
graeme wrote:If this engine is 450,,,
The very last series had wider spaced bolts forward and rear of the cylinder opening in the cases.
The serial number for these was 46———— (I don’t know what number this case change started)



Regards
Graeme


i have a 450 engine with engine nr 460754 and it still has the narrower bolt spacing .

Eldert


i checked a few 450 cases i had laying around and i have a case with number 460569 and it had the wider spacing .

beats me , the later engine nr is still the narrow bolt spacing so the change must have been around these engine numbers

Eldert
Last edited by Eldert on Wed Apr 18, 2018 9:18 am, edited 1 time in total.

Ventodue
Posts: 952
Joined: Mon Mar 08, 2010 3:23 pm
Location: Montpellier, France

Re: First Ducati

Postby Ventodue » Wed Apr 18, 2018 7:16 am

Eldert wrote: i have a 450 engine with engine nr 460754 and it still has the narrower bolt spacing .

Eldert wrote: i checked a few 450 cases i had laying around and i have a case with number 460754 and it had the wider spacing.


Eh? What? Which? :D


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 37 guests