I've bought (but don't have in hand just yet) a 1966 Monza 250.
It's in pretty good shape considering it'e been sitting for 30+ years - but in a shop. Has good compression and is pretty well complete.
I'll probably ask a bunch of dumb questions, as this is my first Ducati.
I'm not going for a concourse style restore - just a great looking vintage bike that runs well and is fun to ride.
Though I reside in Alberta, Canada, I'm in the US for three months and hope to buy a few things here to reduce shipping expense
Three things on my mind right now - a manual, handlebars, and a carb.
For bars, I want something lower and narrower, but not full on cafe style - something like my BMW RS90 bars, but don't know whether to buy 22mm or 7/8 diameter?
It has an Amal carb on it with no choke, I hear the Dellortos gave trouble. From what I've read so far, Mikuni seems like the best replacement, but which model?
I'm sure there will be lots more cries for help - thanks for letting me join.
New to the forum and vintage Ducatis
Moderator: ajleone
-
- Site Admin
- Posts: 1124
- Joined: Fri Oct 23, 2009 2:49 am
Re: New to the forum and vintage Ducatis
Welcome to the forum.
I don't know that DellOrtos are as troublesome as their reputation would lead you to believe, I've only found the SSI29 to be temperamental and a bit crude insomuch as the amount of adjustments you can make to it are few. Perhaps my slide or the carb body are too badly worn to get satisfactory results.
I did buy a Ducati bitsa 250 that came to me with a Mikuni, and after working through the jetting I found it to be a decent and well-behaved carb.
viewtopic.php?f=3&t=2499&p=18645&hilit=mikuni#p18645
Something like "z-bars' can give you a clip-on look without the expense.
http://i.ebayimg.com/images/i/231430558 ... -l1000.jpg
Unfortunately at the moment I can't tell you what the standard diameter of the Ducati singles handlebars is. My Mach 1 has clip-ons and the bitsa 250 has an aftermarket fork and I put clip-ons on it years ago. I am not sure what I did with the handlebars, but being as the fork is aftermarket, the handlebars may not have been the right diameter for Ducati fork clamps.
Jim
I don't know that DellOrtos are as troublesome as their reputation would lead you to believe, I've only found the SSI29 to be temperamental and a bit crude insomuch as the amount of adjustments you can make to it are few. Perhaps my slide or the carb body are too badly worn to get satisfactory results.
I did buy a Ducati bitsa 250 that came to me with a Mikuni, and after working through the jetting I found it to be a decent and well-behaved carb.
viewtopic.php?f=3&t=2499&p=18645&hilit=mikuni#p18645
Something like "z-bars' can give you a clip-on look without the expense.
http://i.ebayimg.com/images/i/231430558 ... -l1000.jpg
Unfortunately at the moment I can't tell you what the standard diameter of the Ducati singles handlebars is. My Mach 1 has clip-ons and the bitsa 250 has an aftermarket fork and I put clip-ons on it years ago. I am not sure what I did with the handlebars, but being as the fork is aftermarket, the handlebars may not have been the right diameter for Ducati fork clamps.
Jim
-
- Posts: 87
- Joined: Sat Jul 18, 2015 5:52 pm
Re: New to the forum and vintage Ducatis
I also have a Monza which I added an AMAL Mk 1 Concentric carb to. I also added a Powerdyamo ignition and it runs great.
The bike came with Ace bars which look good and are probably the only part of the bike that aren't original. If you have any questions feel free to ask.
The bike came with Ace bars which look good and are probably the only part of the bike that aren't original. If you have any questions feel free to ask.
-
- Posts: 93
- Joined: Wed Aug 16, 2017 4:07 am
- Location: Indpls, IN
Re: New to the forum and vintage Ducatis
Aren’t 7/8” and 22.2mm bars the same thing? I always assumed bars came in 7/8” and 1” (for Harley and some Triumph and the like)
-
- Posts: 9
- Joined: Thu Jan 11, 2018 3:08 am
Re: New to the forum and vintage Ducatis
7/8 bars are .2mm fatter than 22mm. Found this out the hard way doing my BMW /5 - bought some Brit size bars and the controls, throttle tube etc. wouldn’t fit.
-
- Posts: 299
- Joined: Fri Apr 01, 2011 12:43 am
- Location: Lakeland fl
Re: New to the forum and vintage Ducatis
Hi folknride,
My aftermarket 7/8 bars fit everything Ducati I have just fine.
Enjoy your new project...
Bruce
My aftermarket 7/8 bars fit everything Ducati I have just fine.
Enjoy your new project...
Bruce
-
- Posts: 9
- Joined: Thu Jan 11, 2018 3:08 am
Re: New to the forum and vintage Ducatis
ecurbruce wrote:Hi folknride,
My aftermarket 7/8 bars fit everything Ducati I have just fine.
Enjoy your new project...
Bruce
Thank you!
-
- Posts: 9
- Joined: Thu Jan 11, 2018 3:08 am
Re: New to the forum and vintage Ducatis
halfpast wrote:I also have a Monza which I added an AMAL Mk 1 Concentric carb to. I also added a Powerdyamo ignition and it runs great.
The bike came with Ace bars which look good and are probably the only part of the bike that aren't original. If you have any questions feel free to ask.
Nice!
-
- Posts: 444
- Joined: Sun Jun 04, 2017 11:33 am
- Location: Stafford UK
Re: New to the forum and vintage Ducatis
My 175 has some old Tomaselli Cross bars on, which measure up as 7/8". Held to the top yoke by some little U-bolts, so I don't think the 0.2mm would matter there. I can see your point about the throttle tube though.
-
- Posts: 444
- Joined: Sun Jun 04, 2017 11:33 am
- Location: Stafford UK
Re: New to the forum and vintage Ducatis
I run Dellorto VHB carbs on my 2 Guzzis and find them pretty easy to get on with. The little 175 came with an MB22 but it's beyond saving so will be replaced by a PHBL24. These can be bought new for sensible money, or at least they can here in UK.
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 14 guests