A63buggy wrote: I was in Montpellier last fall! Thank you that answers a lot of my questions.
Ah! 'tis a small world ...
![Wink ;)](./images/smilies/icon_e_wink.gif)
A63buggy wrote: Let me know if you find a place to upload that owners manual. Maybe it's possible to load the manual to the thread on this forum that has the other bikes manuals loaded.
For the manual, try this link:
https://ducrappi.sharefile.com/d/s00c3d7daeb94912b
I'll leave the administrators to make the decision whether to upload it to the site
![Smile :)](./images/smilies/icon_e_smile.gif)
A63buggy wrote:A detailed parts list would do most all I need, short of torq specs for engine bolts. You are right about the fork top tubes. I need to see what the difference is in the bolt attachments for the bottom tubes
Hopefully someone (Tony, Bob, Kev, Jim, Eldert, Nigel, ano ...?) will be able to help with the torque for the engine bolts. For the forks, take Tony's advice - he knows way more than I do!
A63buggy wrote:Struggling so hard in my head about how to do something for the frame, but not make it to shiny so it still goes with the tanks patina. But the frame is really bad enough I should do something so it doesn't fully rust out.
I hear you. The frame is important. A good painter, i.e. someone used to doing restoration work, should be able to do you something for the frame which won't look too new and garish. Ask around ...