Motoscrubs.com

I am looking for a clutch cable (with or without sheath) with a 8mm barrel on the end. I have some aftermarket clip-ons and the hole in the clutch lever won't accept any barrel larger than 8mm diameter. I can seem to find cables with 10mm barrels all day long.

If you have a cable to sell me or know where I can buy one please let me know.

Jim

Flanders will custom make just about any cable needed. They will also supply a kit so you can make or modify your own.

www.flandersco.com

Thanks,

By the way, I found that a Vespa P200 clutch cable is usable.

Length is good (long version), barrel is a good size and cable diameter is spot on too.

Jim