NEEDED... Coffin Tank, Grimeca dual sided front hub, etc...
Posted: Thu Feb 09, 2012 6:27 pm
Need some parts, not having much luck looking in the normal places...
Rear sets for late desmo, or brake side at least... Or does anyone know where to get a folding brake peg ? not the large peg, but the small peg on the control lever... I have some reproduction folding pegs already, I would be ok with making some rearsets if i could find a little folding peg.
Need a coffin tank still...
Need a double sided 2ls front 180mm grimeca hub (like the late singles came with) I have brake plates already, I would buy a bare hub, or a complete one. A guzzi 250 2c, or benelli 250 2c front hub will also be good with me.
Need a late mark 3 headlamp bucket (pancake style) I bought one sight unseen that is actually a darmah headlight I believe.
Need a 31.5mm Front end upper fork yoke, I would prefer a smooth one as a w/c mark 3, and others would have had...but I could do with a handlebar style for now till I find another...
Need smiths gauges as a late single would have come with, I can find the tach nos/and used still, but havent seen any speedos. I do have a near mint CEV 120mph speedo from a late mark 3 if anyone is interested in that.
Need Marzocchi 35mm ,170 or 180mm spacing Alloy triples (yokes) I would be using these on a w/c ducati, but I will make my own steering stem, so Im not worried about that. RT 450 Pieces would be good or something similar to that, I already have a w/c scr front end, so if anyone has just a lower to match the scr upper (but made of aluminum instead of steel) I would be interested in that also...
Still need a n/c scrambler rear fender...
Last but not least, i need a dellorto ss1 bare fuel bowl, for a ss1 27 d, 12 degree style (for my 66 n/c 250 scrambler) I have one but it is very rough.
I have some $$ and also a lot of other parts I dont really need to trade. please email me if you have anything, thanks
Rear sets for late desmo, or brake side at least... Or does anyone know where to get a folding brake peg ? not the large peg, but the small peg on the control lever... I have some reproduction folding pegs already, I would be ok with making some rearsets if i could find a little folding peg.
Need a coffin tank still...
Need a double sided 2ls front 180mm grimeca hub (like the late singles came with) I have brake plates already, I would buy a bare hub, or a complete one. A guzzi 250 2c, or benelli 250 2c front hub will also be good with me.
Need a late mark 3 headlamp bucket (pancake style) I bought one sight unseen that is actually a darmah headlight I believe.
Need a 31.5mm Front end upper fork yoke, I would prefer a smooth one as a w/c mark 3, and others would have had...but I could do with a handlebar style for now till I find another...
Need smiths gauges as a late single would have come with, I can find the tach nos/and used still, but havent seen any speedos. I do have a near mint CEV 120mph speedo from a late mark 3 if anyone is interested in that.
Need Marzocchi 35mm ,170 or 180mm spacing Alloy triples (yokes) I would be using these on a w/c ducati, but I will make my own steering stem, so Im not worried about that. RT 450 Pieces would be good or something similar to that, I already have a w/c scr front end, so if anyone has just a lower to match the scr upper (but made of aluminum instead of steel) I would be interested in that also...
Still need a n/c scrambler rear fender...
Last but not least, i need a dellorto ss1 bare fuel bowl, for a ss1 27 d, 12 degree style (for my 66 n/c 250 scrambler) I have one but it is very rough.
I have some $$ and also a lot of other parts I dont really need to trade. please email me if you have anything, thanks