250 NC camshaft & intake rocker needed.

[el_guru]

Hi Guys,

I have a spare complete 250 Monza NC head but the intake camshaft lobe is worn about 1mm so any help securing a camshaft and intake rocker would be very appreciated.

Thanks.

[joe46ho]

Hey,

I have a lot of spares, just going through them, been very busy lately...

I have 2 "white" 250 SCR cams
also have 2 odd rockers, 1 adjustable type (screw not included) and 1 solid type

I could sell you the cam, and 1 rocker if you need... pm me.

If you have a original un-modified monza I believe you have the violet cam, which honestly is the worst cam, performance wise, the "white " cam I have isnt a lot better, but is a small improvement over the violet monza cam. also is your rocker shaft, and bushing ok ? I have a spare one of each also. but it would be extra $$ for those 2 pieces... I see all duke single cams and rockers going for crazy prices on ebay. I would sell you these cheap. I would sell them even cheaper If you sent me yours first as "cores" though, because Ive been needing a "core" cam to send out and have hardwelded/ground to custom specs... Let me know...

Joe