Motoscrubs.com

I'm looking to buy some rebuild parts for a Grimeca front calliper from a JC22 Honda NSR125.

These bikes didn't come to Australia so Honda Au don't carry parts and aren't interested in getting them for me.
Ebay is of some use but,,,,,,

If you can help please pm me and I will supply part numbers and descriptions of what I need.
Or best, tell me who to contact, what shop etc.

Thanks

Graeme

Hi Graeme

did you have a look at the cms.nl website ?

Regards Eldert

Thank you Eldert,

I will contact them tomorrow.

(I gave up trying to fit a Brembo calliper to the NSR forks, so bought a second hand Grimeca from a NSR.)

Regards
Graeme

Hi,
Try writing directly to the Grimeca factory, a couple of years ago they posted me a couple of seals for an MZ caliper I could not find anywhere, very helpful.
Sorry I can't remember the company web site but you'll find it online.

Regards,

Alex

Thank you Alex,

That’s worth a try.
No one has the slide bolts I need. No longer available from Honda

Graeme

I guess the bolts You have now are beyond repair ? Could You take measurements of the parts You need ?
Since Honda Italy used a great number of Italian factories to supply stuff, those calipers were probably used on more Honda 125s . Pretty sure I've seen those calipers loaded in boxes on many mostra scambio.
Would help if we knew what to look for.

ciao
ducadini
now preparing for his first mostra scambio in almost two years

Hello Ducadini,

The 2 slide bolts 11 and 12.
Also need 13 and 14 rubbers , these are available but I didn’t buy them because I can’t get the slide bolts.
The ones I have are badly rusted.


These bikes didn’t come to Australia
Honda Au and UK, or other online stores say they are no longer available

Graeme

Graeme, looks like this is the caliper that is used on the Honda. Just the supportplate is different.
Maybe You'll have more luck searching for this Aprilia (although that model isn't a millionseller).
https://www.benl.ebay.be/itm/222288175907?hash=item33c1686323:g:6BAAAOSwHsRYCQW6


If all goes well, I'll be off to Italy for a few days of mountains, vino e pizza at the mostra scambio at Dueville. If You can give measures of the bolts, I can look for those. Looking for bevelparts means turning everything upside-down, a few bolts will not make a big difference.

ciao
ducadini

Thank you,
Here is the dimensions of pin bolt a.
This is very rusted so can’t be sure of the diameter.

The other bolt I can make.

Regards
Graeme