WTB: Borrani 4647
Posted: Fri Dec 25, 2020 7:40 pm
Looking to buy a Borrani WM2 18 x 36 with Record 4647 in good nick. This is the rear rim typically fitted on the alloy rim
Mark 3 and Mark 3D bikes. The drilling accommodates the typical 160mm Grimeca drum brake hub. Don't need the
whole wheel, but if that is what is available, would work too.
Have loads of trade goods, should that be desired; widecase, roundcase and squarecase.
I am located in Prescott, Arizona.
John
Mark 3 and Mark 3D bikes. The drilling accommodates the typical 160mm Grimeca drum brake hub. Don't need the
whole wheel, but if that is what is available, would work too.
Have loads of trade goods, should that be desired; widecase, roundcase and squarecase.
I am located in Prescott, Arizona.
John