Page 1 of 1
Wanted:Narrowcas crank pin and bearing
Posted: Sat Aug 22, 2020 12:39 am
by djstedman
Trying to find a 1966 250 narrowcase crank pin, All of the parts houses are fresh out. Road and race was looking to fill their coffers but can’t seem to pin a set down. Extremely aggravating. Anyone Holding a 27/32/27 pin they are willing to sell?
Holding my breath
Doug
Re: Wanted:Narrowcas crank pin and bearing
Posted: Sat Aug 22, 2020 12:43 am
by graeme
Lacey Ducati
Ducati Vintage Store
Re: Wanted:Narrowcas crank pin and bearing
Posted: Sat Aug 22, 2020 4:26 am
by djstedman
Tried Nigel, his cupboards were bare.
Re: Wanted:Narrowcas crank pin and bearing
Posted: Sat Aug 22, 2020 7:27 am
by Eldert
Hi Doug
the rod bearing you can buy from the king of piston in Italy . runs about 30 euro .
i have some pins laying around . i bought them from ebay seller 125freccia . Laura is the ladies name
and she is the widow of Joe from Eurorods .
i could sell you one . my cost was 110 euro a pin .
i dont know what part of the globe your in ?
Regards Eldert
Re: Wanted:Narrowcas crank pin and bearing
Posted: Sat Aug 22, 2020 2:03 pm
by djstedman
Eldert-
Ah yes, I had reached out to her and she mentioned that someone had bought all her narrowcase stock already.
This is the best news, thank you so much. Let me know how i can get you some $$. I’m in Portland, Oregon USA.
If it easier you can send me a email to djstedman at gmail
Much thanks
Doug