Trying to find a 1966 250 narrowcase crank pin, All of the parts houses are fresh out. Road and race was looking to fill their coffers but can’t seem to pin a set down. Extremely aggravating. Anyone Holding a 27/32/27 pin they are willing to sell?
Holding my breath
Doug
Wanted:Narrowcas crank pin and bearing
Moderator: ajleone
-
- Posts: 18
- Joined: Fri Dec 13, 2013 10:34 pm
Wanted:Narrowcas crank pin and bearing
Last edited by djstedman on Sat Aug 22, 2020 4:56 am, edited 1 time in total.
-
- Posts: 949
- Joined: Sun Mar 25, 2012 12:00 am
- Location: Tasmania Australia
Re: Wanted:Narrowcas crank pin and bearing
Lacey Ducati
Ducati Vintage Store
Ducati Vintage Store
-
- Posts: 18
- Joined: Fri Dec 13, 2013 10:34 pm
Re: Wanted:Narrowcas crank pin and bearing
Tried Nigel, his cupboards were bare.
-
- Posts: 772
- Joined: Sun Nov 01, 2009 3:23 pm
- Location: Hazerswoude Rijndijk Netherlands
Re: Wanted:Narrowcas crank pin and bearing
Hi Doug
the rod bearing you can buy from the king of piston in Italy . runs about 30 euro .
i have some pins laying around . i bought them from ebay seller 125freccia . Laura is the ladies name
and she is the widow of Joe from Eurorods .
i could sell you one . my cost was 110 euro a pin .
i dont know what part of the globe your in ?
Regards Eldert
the rod bearing you can buy from the king of piston in Italy . runs about 30 euro .
i have some pins laying around . i bought them from ebay seller 125freccia . Laura is the ladies name
and she is the widow of Joe from Eurorods .
i could sell you one . my cost was 110 euro a pin .
i dont know what part of the globe your in ?
Regards Eldert
-
- Posts: 18
- Joined: Fri Dec 13, 2013 10:34 pm
Re: Wanted:Narrowcas crank pin and bearing
Eldert-
Ah yes, I had reached out to her and she mentioned that someone had bought all her narrowcase stock already.
This is the best news, thank you so much. Let me know how i can get you some $$. I’m in Portland, Oregon USA.
If it easier you can send me a email to djstedman at gmail
Much thanks
Doug
Ah yes, I had reached out to her and she mentioned that someone had bought all her narrowcase stock already.
This is the best news, thank you so much. Let me know how i can get you some $$. I’m in Portland, Oregon USA.
If it easier you can send me a email to djstedman at gmail
Much thanks
Doug
Return to “Classifieds: Ducati Parts/Accessories wanted or for sale”
Who is online
Users browsing this forum: No registered users and 3 guests