Page 1 of 1
Need: Stator plate or Al Flywheel
Posted: Wed Aug 12, 2015 2:35 pm
by a_kress
I'm looking for a stator plate for a NC 250. I've got a stator for a an aluminum flywheel and a brass (?) type flywheel. Those two won't work together.
I can purchase or trade one of the pieces that I don't need.
Pictures of both can be seen here:
https://www.flickr.com/photos/enzochi/
Re: Need: Stator plate or Al Flywheel
Posted: Wed Aug 12, 2015 7:29 pm
by Eldert
Hi Adam
you need a 6 magnet flywheel for your statorplate . or a 2 coil statorplate to work with your 4 magnet rotor
the 6 magnet flywheel was in aluminium for a 250 and in brass for the 350 Sebring
Eldert
Re: Need: Stator plate or Al Flywheel
Posted: Mon Aug 24, 2015 12:47 pm
by a_kress
Eldert wrote:Hi Adam
you need a 6 magnet flywheel for your statorplate . or a 2 coil statorplate to work with your 4 magnet rotor
the 6 magnet flywheel was in aluminium for a 250 and in brass for the 350 Sebring
Eldert
Thanks Eldert. I ended up getting a 6 mag flywheel off ebay last night for a pretty good price. I'll find out if it's usable in a few days.
If anyone needs a 4 magnet flywheel let me know!
Re: Need: Stator plate or Al Flywheel
Posted: Sun Aug 30, 2015 5:29 pm
by a_kress
Annndddd.... I'm part dumbass!!
The aluminum flywheel won't fit in my 250. So now I've got a al flywheel and stator for sale or trade. I've still got the brass one and I'll use that but I still need the two coil stator.
Anyone happen to have one?