Page 1 of 2
1965 Monza 250 nc center stand
Posted: Tue Jun 16, 2015 5:22 am
by flanker
I really could use a good canter stand replacement if anyone has one thx rob
Re: 1965 Monza 250 nc center stand
Posted: Mon Jul 27, 2015 6:11 pm
by MayerMR
Flanker,
I'm in the same boat, but I'm using a different suspension and my bike doesn't even have a centerstand. You don't happen to have yours off where you could send me some measurements do you by chance?
Thanks!
-Matt
Re: 1965 Monza 250 nc center stand
Posted: Tue Jul 28, 2015 2:08 am
by TrexDucatis
One came up on eBay today.
Re: 1965 Monza 250 nc center stand
Posted: Tue Jul 28, 2015 2:38 am
by MayerMR
TrexDucatis wrote:One came up on eBay today.
I saw your other post and looked it up, but it's kind of bent us isn't it? I really need to just have one made and need a pattern to use to make it longer.
Re: 1965 Monza 250 nc center stand
Posted: Fri Jul 31, 2015 6:47 am
by flanker
Matt, what measurements do you need? Cheers Rob
Re: 1965 Monza 250 nc center stand
Posted: Fri Jul 31, 2015 6:50 am
by flanker
MayerMR wrote:Flanker,
I'm in the same boat, but I'm using a different suspension and my bike doesn't even have a centerstand. You don't happen to have yours off where you could send me some measurements do you by chance?
Thanks!
-Matt
I have a brand new wide case one I ordered by mistake. Road and race said they may restock narrow cases in a few months. I think I'm going to try and get the on of eBay. It seems they are all bent. I think the powder coated lost my original or I'll probably find mine when I'm done..... Rob
Re: 1965 Monza 250 nc center stand
Posted: Fri Jul 31, 2015 3:51 pm
by MayerMR
flanker wrote:Matt, what measurements do you need? Cheers Rob
Rob,
I'm missing mine entirely so what I really need are *all* the measurements haha! Since I have the taller suspension I'll need to extend the legs of course, but yeah, I don't have anything to go off of at this point.
I'm going to have to have a custom job made I do believe.
-Matt
Re: 1965 Monza 250 nc center stand
Posted: Fri Jul 31, 2015 11:12 pm
by flanker
If I get the on on eBay I will measure it up! R
Re: 1965 Monza 250 nc center stand
Posted: Fri Jul 31, 2015 11:13 pm
by flanker
If I get the on on eBay I will measure it up! R
Re: 1965 Monza 250 nc center stand
Posted: Fri Jul 31, 2015 11:17 pm
by flanker
MayerMR wrote:flanker wrote:Matt, what measurements do you need? Cheers Rob
Rob,
I'm missing mine entirely so what I really need are *all* the measurements haha! Since I have the taller suspension I'll need to extend the legs of course, but yeah, I don't have anything to go off of at this point.
I'm going to have to have a custom job made I do believe.
-Matt
Do you have a different front or rear suspension. I'm trying to picture how it matters.