Page 1 of 1
rear wheel spacer or wanted
Posted: Sun Apr 26, 2015 1:44 pm
by Kthomas
Anyone have a spare rear wheel spacer for 250 NC . I think they are suppose to be 84.5 inches long. Whenever I tighten my axle nuts the wheel doesn't want to turn as well so I'm thinking this might be the problem. Any suggestions are appreciated. Thanks
Re: rear wheel spacer or wanted
Posted: Mon Apr 27, 2015 2:24 am
by GT Wunder
Went down into the catacombs and removed a spacer from an old scrambler rear wheel and measured - 84.5mm - I think it's what you want. What happened to yours ?
If you are within posting distance (US) and want it let me know.
BTW, what model / year Duke ? Pix ?
Welcome to the forum George T.
Re: rear wheel spacer or wanted
Posted: Mon May 04, 2015 12:19 pm
by Kthomas
Hi
Thank you for your reply. I have one in my rear wheel at present but it must be worn as whenever I tighten up the rear wheel it doesn't turn as freely. I haven't taken it out yet to measure it. Since I posted this a friend told me I could put a shim in there and it would solve it but ? I haven't had time to do it. If that doesn't work I would appreciate the spacer.
Thanks