Does anyone know where to find a kickstart shim for a 450 scrambler? Specifically, in mm, id,od,thickness = 22.1x27.5x0.5
The Ducati, classics site in England is non responsive. I have tried McMaster and other suppliers but the thickness and diameter are a difficult combination.
Thanks in advance for any help or direction.
kickstart shim
Moderator: ajleone
-
themoudie
- Posts: 741
- Joined: Sat Jun 14, 2014 12:44 am
- Location: Scotland
Re: kickstart shim
Speak to Nigel Lacey (http://www.laceyducati.com/ducati-parts/), whom often enters into discussions on this board.
Alternatively, I am sure 'Road & Race' (http://roadandrace.com.au/contact.htm), would be able to help out.
I believe 'Classic Ducati Motorcycles' are on holiday and re-writing their site with the intention of re-starting the site on the 1st August 2014 for business.
Of course there are other suppliers whom you may choose to use.
I hope this helps and that you can return the bike to the road in the near future.
My regards, Bill.
Alternatively, I am sure 'Road & Race' (http://roadandrace.com.au/contact.htm), would be able to help out.
I believe 'Classic Ducati Motorcycles' are on holiday and re-writing their site with the intention of re-starting the site on the 1st August 2014 for business.
Of course there are other suppliers whom you may choose to use.
I hope this helps and that you can return the bike to the road in the near future.
My regards, Bill.
Return to “Classifieds: Ducati Parts/Accessories wanted or for sale”
Who is online
Users browsing this forum: No registered users and 23 guests