Page 1 of 1
Wanted parts for 1964 n/c Scrambler
Posted: Sat Oct 27, 2012 4:40 pm
by 250ish
I need the following for a 1964 sc250 n/c
Tank
Headlamp bucket
wiring loom
speedo
complete carburator VHB26 or similar (known to work) for this bike.
complete rear hub
grgcvl@gmail.com
Re: Wanted parts for 1964 n/c Scrambler
Posted: Sun Oct 28, 2012 4:41 pm
by JimF
I could probably talk you through making a wiring loom if you are not doing a 100-point restoration.
I will check my garage to see if I have a hub. No promises but if there is one out there it will be yours.
Jim
Re: Wanted parts for 1964 n/c Scrambler
Posted: Sun Oct 28, 2012 6:20 pm
by 250ish
Ok sounds good. I'll look you up when the time comes to wire it.
Greg
Re: Wanted parts for 1964 n/c Scrambler
Posted: Sat Nov 10, 2012 11:44 pm
by JimF
Sorry, no hub in the garage. For some unknown reason I have front brake plates with shoes but not the hubs to match.
Jim
Re: Wanted parts for 1964 n/c Scrambler
Posted: Sun Nov 11, 2012 3:37 pm
by 250ish
Bummer, I'm sure something will come along