I know people have found alternatives for the large scrambler air filters, but does anyone have a source or a substitute for this filter?
Thanks,
Jim
Air filters re-visited
Moderator: ajleone
-
- Site Admin
- Posts: 1135
- Joined: Fri Oct 23, 2009 2:49 am
Air filters re-visited
You do not have the required permissions to view the files attached to this post.
-
- Posts: 507
- Joined: Sat Jan 01, 2011 12:57 pm
Re: Air filters re-visited
What are the dimensions Jim? I'm just wondering if it is the same filter as used on the stock 900 squarecases, in which case I've tracked down a perfect fitting replacement from a tractor.
Kev
Kev
-
- Site Admin
- Posts: 1135
- Joined: Fri Oct 23, 2009 2:49 am
Re: Air filters re-visited
Hi Kev,
The dimensions are:
OD.: 99mm (3.9 in.)
ID.: 63mm (2.48 in.)
Height: 40mm (1.576 in.)
The dimensions are:
OD.: 99mm (3.9 in.)
ID.: 63mm (2.48 in.)
Height: 40mm (1.576 in.)
-
- Posts: 507
- Joined: Sat Jan 01, 2011 12:57 pm
Re: Air filters re-visited
No, sorry Jim. That's much smaller. I couldn't tell the scale from the pics.
Kev
Kev
-
- Posts: 247
- Joined: Mon Jun 20, 2011 10:45 pm
- Location: Erlanger, Ky
- Contact:
Re: Air filters re-visited
Jim, I have run into this issue before...
I am running a wix #42719
also available as a napa gold #2719
The slightly smaller id is not a problem, fits good, the factory one was a loose fit anyway, and it is just slightly taller also not a problem. o.d. is basically identical...
Cost me $8.22 at rock auto (online) and possibly available in your town, or just buy one online...
http://www.rockauto.com/catalog/moreinfo.php?pk=578603
Joe
I am running a wix #42719
also available as a napa gold #2719
The slightly smaller id is not a problem, fits good, the factory one was a loose fit anyway, and it is just slightly taller also not a problem. o.d. is basically identical...
Cost me $8.22 at rock auto (online) and possibly available in your town, or just buy one online...
http://www.rockauto.com/catalog/moreinfo.php?pk=578603
Joe
Too many projects to list...
12 Ducati singles currently
12 Ducati singles currently
-
- Posts: 247
- Joined: Mon Jun 20, 2011 10:45 pm
- Location: Erlanger, Ky
- Contact:
Re: Air filters re-visited
Im not sure how much of an "exact science" it is when they measured these... but i have a new one here in front of me, it measures as follows
O.D.- 98mm
I.D.-58mm
Height-41mm
Joe...
O.D.- 98mm
I.D.-58mm
Height-41mm
Joe...
Too many projects to list...
12 Ducati singles currently
12 Ducati singles currently
-
- Site Admin
- Posts: 1135
- Joined: Fri Oct 23, 2009 2:49 am
Re: Air filters re-visited
Thanks Joe.
The one I pulled out was a "Fram" filter, so definitely not original and not Italian.
Your dimensions are certainly more accurate than mine.
Thanks for the good information. I'll order one today.
Jim
The one I pulled out was a "Fram" filter, so definitely not original and not Italian.
Your dimensions are certainly more accurate than mine.
Thanks for the good information. I'll order one today.
Jim
-
- Posts: 247
- Joined: Mon Jun 20, 2011 10:45 pm
- Location: Erlanger, Ky
- Contact:
Re: Air filters re-visited
Jim, im not sure how close the fram one you have fits, but I think advance auto ? or another chain store sells fram...just a thought, but i looked around, and no one online, or locally could beat rockauto.com's price on a wix one. Plus (only my opinion, but shared by many others) Wix produces very good filters, much better than fram, and probably almost any other competitive filter on the market. I was actually looking into a k/n equiv. and I searched there entire catalog, nothing available, at least not anywhere near as close of a fit as this wix filter i referenced... or I would have bought one instead.
Joe
Joe
Too many projects to list...
12 Ducati singles currently
12 Ducati singles currently
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 40 guests