I want to replace the cheapo truck light that the previous owner put on my '70 450 SCR.
I think the correct light is either the CEV 9241
http://www.guzzino.com/cevtali9.html
or the CEV 9313 (black body)
http://www.guzzino.com/noname48.html
Is one of these right or is there another?
Thanks
Correct Tail Light?
Moderator: ajleone
-
- Posts: 394
- Joined: Sat Oct 31, 2009 10:25 pm
- Location: Pacifc Northwet USA
Correct Tail Light?
1970 450 SCR
-
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: Correct Tail Light?
" I think the correct light is either the CEV 9241
or the CEV 9313 (black body) "
____ Unfortunately, it's the higher priced #9313...
(The other looks to be for a 1973 750 Sport & 750SS.)
-Bob
or the CEV 9313 (black body) "
____ Unfortunately, it's the higher priced #9313...
(The other looks to be for a 1973 750 Sport & 750SS.)
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
-
- Posts: 394
- Joined: Sat Oct 31, 2009 10:25 pm
- Location: Pacifc Northwet USA
Re: Correct Tail Light?
Pretty much what I figured.
Any other source for the black bodied version? Domiracer says no more stock. Have not seen any on the usual suspects.
Any other source for the black bodied version? Domiracer says no more stock. Have not seen any on the usual suspects.
1970 450 SCR
-
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: Correct Tail Light?
" Any other source for the black bodied version? "
____ I know that one of our other registered-members has one! _ I think he's thinking of listing it on eBay.
I'll suggest to him that he try listing it here as well.
-Bob
____ I know that one of our other registered-members has one! _ I think he's thinking of listing it on eBay.
I'll suggest to him that he try listing it here as well.
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
-
- Posts: 394
- Joined: Sat Oct 31, 2009 10:25 pm
- Location: Pacifc Northwet USA
Re: Correct Tail Light?
DewCatTea-Bob wrote:I know that one of our other registered-members has one! _ I think he's thinking of listing it on eBay.
I'll suggest to him that he try listing it here as well.
Well tell him to PM me here. I would like first shot at it. Thanks.
1970 450 SCR
-
- Posts: 102
- Joined: Sun Nov 01, 2009 1:00 am
- Location: Walworth, NY
-
- Posts: 394
- Joined: Sat Oct 31, 2009 10:25 pm
- Location: Pacifc Northwet USA
Re: Correct Tail Light?
I don't know for sure. The body looks the same but the lens is different.
Looks like this lens
http://www.guzzino.com/cev127talile1.html
which would not be the same light.
1970 450 SCR
-
- Posts: 230
- Joined: Sat Oct 31, 2009 11:20 pm
- Location: Pittsford, NY
- Contact:
Re: Correct Tail Light?
One question - Do you have a boss in the rear fender frame loop for a cap screw ? If so, I might have an option for you. The one CEV tail light that I have on my 450 SCR has a single cap screw that attaches the horizontal mount of the tail light to the frame. The other style is the 2 hole flange in the horizontal plat that bolts to the fender.
Shoot us a pic of what we are looking at on your bike.
Tony
Shoot us a pic of what we are looking at on your bike.
Tony
-
- Posts: 394
- Joined: Sat Oct 31, 2009 10:25 pm
- Location: Pacifc Northwet USA
Re: Correct Tail Light?
ajleone wrote:One question - Do you have a boss in the rear fender frame loop for a cap screw ? If so, I might have an option for you. The one CEV tail light that I have on my 450 SCR has a single cap screw that attaches the horizontal mount of the tail light to the frame. The other style is the 2 hole flange in the horizontal plat that bolts to the fender.
Shoot us a pic of what we are looking at on your bike.
Tony
My light bracket/plate holder has two holes for the screws on the light with a hole in the center for the wires.
Like this one.
1970 450 SCR
-
- Posts: 2897
- Joined: Sun Nov 01, 2009 10:53 am
- Location: Near SE side of Lake Michigan
Re: Correct Tail Light?
The question is whether you have the type of tail-light bracket with an upper-mount that bolts directly to the frame, or just the fender only !?
__ The type that's bolted to the frame-loop, is for the Scrambler models only.
-Bob
__ The type that's bolted to the frame-loop, is for the Scrambler models only.
-Bob
PLEASE NOTE... If this-post is not-yet signed-off with '-Bob', then I'm still in the process of completing it,, and if not also included with 'DCT' near bottom as well, then I may edit this post's wording at a later time. - Dct.Bob
Return to “Ducati Singles Main Discussions (& How to Join)”
Who is online
Users browsing this forum: No registered users and 22 guests