Lathe too small? Adapting of linings
Posted: Sat Sep 13, 2025 9:57 am
After 20km with new linings and lack of braking power on the front, i decided to do the same as with the oversize linings at the back.
On the back, i have a very very sharp brake from first start.
On the front i expect the brake to be improved from 20 to 80% of what is possible.
Test ride next week.
Of course, this is not precise, but it works for me.
Roland
On the back, i have a very very sharp brake from first start.
On the front i expect the brake to be improved from 20 to 80% of what is possible.
Test ride next week.
Of course, this is not precise, but it works for me.
Roland
Cheers George