Page 1 of 1
2mm axial play on shaft of Ducati ignition...
Posted: Tue Jul 15, 2025 1:36 pm
by Roland
...doesn't seem right.
I know, i have to take it apart.
But what is the problem here, missing spacers, or is it normal?
Re: 2mm axial play on shaft of Ducati ignition...
Posted: Tue Jul 15, 2025 5:53 pm
by Duccout
Normal!
Colin.
Re: 2mm axial play on shaft of Ducati ignition...
Posted: Wed Jul 16, 2025 3:33 am
by Roland
Thanks!
Re: 2mm axial play on shaft of Ducati ignition...
Posted: Wed Jul 16, 2025 6:39 am
by Roland
I am very interested in the mechanics behind this assembly.
Especially why it is normal and why it is working this way.
Cross section of it would be very nice, something like this one attached.
Found this drawing somewhere but cannot remember.
It is very nice, perhaps new stuff based on 3D model.
Is more of 2D / 3D stuff available?
Roland