Motoscrubs.com

I need to make some new cables for my Fontana with a splitter box. Finding (and) have plenty of material for clutch etc, but where do I find for brakes?

Venhill engineering everything you need. Cheers George

As George says, Venhill Engineering, link below:

Venhill_control_cables_parts_&_brake_lines

Good health, Bill

Clevis pin, metric. Stainless steel.
Industrial supplier?

At Venhill I can only find the option of having them make it, which turns out to be £150+ for the three cable I need. I have their clutch kit etc, but I cannot see one for brake wires. Am I dim/not looking in the right place?

Give JJ Cables a call, speak to Dave, I am sure he will be able to supply what you require.
01295 971170

Ben hill do have a ‘components’ section where you might be able to find what you need - https://www.venhill.co.uk/cables-and-co ... nents.html

Sorry ‘Venhill’ - damned auto correct!

Aye bendik,

Here is a link to the "Components" area of the Venhill website, where you will see and be able to order the components.

Venhill_cable_components

As you can see there are alternative suppliers.

Good health, Bill

themoudie wrote:Aye bendik,

Here is a link to the "Components" area of the Venhill website, where you will see and be able to order the components.

Venhill_cable_components

As you can see there are alternative suppliers.

Good health, Bill

Thanks!