Motoscrubs.com

Would anyone have access to parts and/or workshop manual of pushrod 125 Ducati Aurea I could buy a printed copy of or where I could download pdf
Thanks in advance.

Cucciolo owners talk about pushrod models sometimes.
If you can find a forum or site, they might help.

Take a look here and you may find what you need https://www.lamaneta.org/manuales/manuales/

IanHood wrote:Take a look here and you may find what you need https://www.lamaneta.org/manuales/manuales/

Thanks for the link. Unfortunately nothing for pushrod models but there are some useful Bevel singles manuals including Mototrans. Worth a look for anyone wanting to download a copy.

George
I have quite a few parts books for the pushrod models, but not sure I have the 125 Aurea, I'll check and let you know. Happy to lend you one to copy if I find one.

Nigel

LaceyDucati wrote:George
I have quite a few parts books for the pushrod models, but not sure I have the 125 Aurea, I'll check and let you know. Happy to lend you one to copy if I find one.

Nigel

Thanks Nigel
I believe the Bronco 125 engine is the same as the Aurea, correct me if I am wrong.

The Ducati Owners Club appear to have the parts book.

LaceyDucati wrote:George
I have quite a few parts books for the pushrod models, but not sure I have the 125 Aurea, I'll check and let you know. Happy to lend you one to copy if I find one.

Nigel

Hi Nigel, have you had time to check if you have the Aurea manuals yet.

Sorry George, been up to my eyes and keep forgetting. I will have a look tomorrow.

Regards Nigel

Hello George

I don't have any copies of owners manuals only parts books. I have two, one for the very early 125 TV and another for the 125 T 1958. I'm guessing the T is similar to the 125 aurea as that was 1958 to 62. Give me a call if you want to borrow it to copy.





Regards Nigel