Would anyone have access to parts and/or workshop manual of pushrod 125 Ducati Aurea I could buy a printed copy of or where I could download pdf
Thanks in advance.
workshop manual
Moderator: ajleone
-
- Posts: 387
- Joined: Fri Feb 14, 2020 2:51 am
- Location: Essex UK
workshop manual
George Essex UK
-
- Posts: 1394
- Joined: Fri Dec 24, 2010 11:29 am
Re: workshop manual
Cucciolo owners talk about pushrod models sometimes.
If you can find a forum or site, they might help.
If you can find a forum or site, they might help.
-
- Posts: 117
- Joined: Wed Jun 08, 2022 4:30 pm
- Location: Surrey, United Kingdom
Re: workshop manual
Take a look here and you may find what you need https://www.lamaneta.org/manuales/manuales/
-
- Posts: 387
- Joined: Fri Feb 14, 2020 2:51 am
- Location: Essex UK
Re: workshop manual
IanHood wrote:Take a look here and you may find what you need https://www.lamaneta.org/manuales/manuales/
Thanks for the link. Unfortunately nothing for pushrod models but there are some useful Bevel singles manuals including Mototrans. Worth a look for anyone wanting to download a copy.
George Essex UK
-
- Posts: 522
- Joined: Sun Sep 19, 2010 10:30 pm
- Location: Wales UK
- Contact:
Re: workshop manual
George
I have quite a few parts books for the pushrod models, but not sure I have the 125 Aurea, I'll check and let you know. Happy to lend you one to copy if I find one.
Nigel
I have quite a few parts books for the pushrod models, but not sure I have the 125 Aurea, I'll check and let you know. Happy to lend you one to copy if I find one.
Nigel
-
- Posts: 387
- Joined: Fri Feb 14, 2020 2:51 am
- Location: Essex UK
Re: workshop manual
LaceyDucati wrote:George
I have quite a few parts books for the pushrod models, but not sure I have the 125 Aurea, I'll check and let you know. Happy to lend you one to copy if I find one.
Nigel
Thanks Nigel
I believe the Bronco 125 engine is the same as the Aurea, correct me if I am wrong.
George Essex UK
-
- Posts: 26
- Joined: Sun Dec 20, 2009 11:09 pm
Re: workshop manual
The Ducati Owners Club appear to have the parts book.
-
- Posts: 387
- Joined: Fri Feb 14, 2020 2:51 am
- Location: Essex UK
Re: workshop manual
LaceyDucati wrote:George
I have quite a few parts books for the pushrod models, but not sure I have the 125 Aurea, I'll check and let you know. Happy to lend you one to copy if I find one.
Nigel
Hi Nigel, have you had time to check if you have the Aurea manuals yet.
George Essex UK
-
- Posts: 522
- Joined: Sun Sep 19, 2010 10:30 pm
- Location: Wales UK
- Contact:
Re: workshop manual
Sorry George, been up to my eyes and keep forgetting. I will have a look tomorrow.
Regards Nigel
Regards Nigel
-
- Posts: 522
- Joined: Sun Sep 19, 2010 10:30 pm
- Location: Wales UK
- Contact:
Re: workshop manual
Hello George
I don't have any copies of owners manuals only parts books. I have two, one for the very early 125 TV and another for the 125 T 1958. I'm guessing the T is similar to the 125 aurea as that was 1958 to 62. Give me a call if you want to borrow it to copy.
Regards Nigel
I don't have any copies of owners manuals only parts books. I have two, one for the very early 125 TV and another for the 125 T 1958. I'm guessing the T is similar to the 125 aurea as that was 1958 to 62. Give me a call if you want to borrow it to copy.
Regards Nigel
You do not have the required permissions to view the files attached to this post.