Page 7 of 7
Re: 450 SCR engine rebuild
Posted: Mon Apr 08, 2024 11:36 am
by Duccout
Hi Wolf,
I think that Nigel or Eldert need to give an opinion on that; cast iron does tend to have impurities and blemishes in it, and those blow holes may not matter, or then again they might....
What do others think?
Cheers,
Colin
Re: 450 SCR engine rebuild
Posted: Mon Apr 08, 2024 11:49 am
by blethermaskite
I wouldn't use those.
Cheers,
George
Re: 450 SCR engine rebuild
Posted: Mon Apr 08, 2024 8:40 pm
by graeme
Agreed, I wouldn’t use them either
Graeme
Re: 450 SCR engine rebuild
Posted: Tue Apr 09, 2024 3:32 pm
by Wolf
...thanks for the feedback! I've already bought a different set of rings.
Cheers
Wolf
Re: 450 SCR engine rebuild
Posted: Mon May 06, 2024 8:13 am
by Wolf
My 450 SCR is back on the road!
Everything is working nicely - thanks a lot again for your valuable input and help!
Cheers
Wolf
Re: 450 SCR engine rebuild
Posted: Mon May 06, 2024 9:03 am
by Duccout
That's a really nice bike Wolf, just keep checking that flywheel nut!
Cheers,
Colin
Re: 450 SCR engine rebuild
Posted: Mon May 06, 2024 9:17 am
by blethermaskite
Looking good.....enjoy!
Cheers,
George
Re: 450 SCR engine rebuild
Posted: Mon May 06, 2024 2:56 pm
by themoudie
Very nice Wolf, now wear it out!
Good health, Bill
Re: 450 SCR engine rebuild
Posted: Mon May 06, 2024 3:47 pm
by Wolf
Bill, that's the plan!
I'm looking forward to - this bike is not made for sitting in the garage. Hope to bring it over the alps to do some nice cornering and have a lot of espresso in the bars connected to the gas stations..
Cheers
Wolf