Speedo drive felt dust seal?

[kaysystems]

Hi

On the speedo drive plate of the front hub of a 250 there is a 55mm diameter felt seal and holder.
Has anyone replaced this or found one? The felt on mine is virtually all gone.

Thanks

David

[Dave354]

Is that the felt covering the wheel bearing? If it is they become redundant when the wheel is fitted with new sealed roller bearings. I can check the ones I took off my hub to see if they are still serviceable?

Regards

Dave

[Dave354]

Cancel my last…. I was looking on the wrong side…. I’ll look in my spares box anyway…..