Winter is over

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Forum rules
Post Reply
Wolf
Posts: 89
Joined: Tue Nov 16, 2021 5:03 pm
Location: Berlin, Germany

Re: Winter is over

Postby Wolf » Tue Apr 25, 2023 7:44 pm

...and a new clutch pressure plate. The saved weigt ist not impressive and there is no improvment in clutch operation noticeable ...but it looks nice. The two Millimeter clutch plate was provided by Carlo Leoncini from Motofficina Leoncini.
You do not have the required permissions to view the files attached to this post.
Last edited by Wolf on Fri Jan 12, 2024 2:08 pm, edited 1 time in total.
Top
Eldert
Posts: 772
Joined: Sun Nov 01, 2009 3:23 pm
Location: Hazerswoude Rijndijk Netherlands

Re: Winter is over

Postby Eldert » Tue Apr 25, 2023 8:45 pm

i modified my pressure plate by adding a Suzuki thrust bearing . works great and i still can adjust the clutch

thrust bearing 001.JPG


Eldert
You do not have the required permissions to view the files attached to this post.
Top
Jordan
Posts: 1394
Joined: Fri Dec 24, 2010 11:29 am

Re: Winter is over

Postby Jordan » Tue Apr 25, 2023 10:20 pm

I put some holes in my 350's pressure plate, but removed much more weight from the clutch housing, with my big drill press and an angle grinder.
It must accelerate faster. :)
DSCN0060sm.jpg
You do not have the required permissions to view the files attached to this post.
Top
Wolf
Posts: 89
Joined: Tue Nov 16, 2021 5:03 pm
Location: Berlin, Germany

Re: Winter is over

Postby Wolf » Thu Apr 27, 2023 3:23 pm

Jordan,

well done! I like the pattern of your design!

Cheers

Wolf
Top
Jordan
Posts: 1394
Joined: Fri Dec 24, 2010 11:29 am

Re: Winter is over

Postby Jordan » Fri Apr 28, 2023 12:04 am

Thanks, Wolf.
I thought it might need to be balanced after the hand held machining, but there is no increase in vibration.
Top
Post Reply

Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: Paul W. and 173 guests