Page 1 of 1
66 Monza finished
Posted: Sat Jul 10, 2021 1:52 pm
by Davescycles72
Wanted to thanks everybody for their help on this project. Bevel single parts are outrages. I rode it around the property a few times,at low speed but it wouldn’t accelerate past 2000,so I got some tuning to do. But all and all I think it turned out well.I will upload pics when the site accepts them. Today it is saying even pics 1.6 Megs is to large
Re: 66 Monza finished
Posted: Sat Jul 10, 2021 11:28 pm
by themoudie
Aye Dave,
I believe the maximum image size per attachment is 500KB and the maximum number of attachments allowed per post is 4. So, you are going to get the image editing software up and running! I use PhotoScape X, there is also Irfan and Gimp, but I find the latter complex! These are all freeware.
Links:
Photoscape_XIrfan_viewerGimpHope this enables you to post your images.
Good health, Bill
Re: 66 Monza finished
Posted: Wed Jul 14, 2021 11:50 am
by Davescycles72
Finished bike
8C82FC7A-3B79-44BA-A11F-8F598C2FEDD7.jpeg
Re: 66 Monza finished
Posted: Wed Jul 14, 2021 12:05 pm
by Duccout
That's really nice. Well done.
Re: 66 Monza finished
Posted: Wed Jul 14, 2021 10:53 pm
by themoudie
Very nice restoration Dave.
Pleased that you managed to post the image.
Good health, Bill
Re: 66 Monza finished
Posted: Fri Jul 16, 2021 1:40 pm
by Davescycles72
Thanks guys, the nos lighting board is still giving me some issues. When I insert the igniting key,I don’t get full battery voltage to the coil. Not having the stock regulator I think is giving me the trouble. Nigel Lacy suggested running a switch wire from battery positive to coil,as electrex regulator works differently. When I do this it starts first kick. But I don’t understand where I am losing that volt and a half.