66 Monza finished

[Davescycles72]

Wanted to thanks everybody for their help on this project. Bevel single parts are outrages. I rode it around the property a few times,at low speed but it wouldn’t accelerate past 2000,so I got some tuning to do. But all and all I think it turned out well.I will upload pics when the site accepts them. Today it is saying even pics 1.6 Megs is to large

[themoudie]

Aye Dave,

I believe the maximum image size per attachment is 500KB and the maximum number of attachments allowed per post is 4. So, you are going to get the image editing software up and running! I use PhotoScape X, there is also Irfan and Gimp, but I find the latter complex! These are all freeware.

Links:

Photoscape_X

Irfan_viewer

Gimp

Hope this enables you to post your images.

Good health, Bill

[Davescycles72]

Finished bike

8C82FC7A-3B79-44BA-A11F-8F598C2FEDD7.jpeg

[Duccout]

That's really nice. Well done.

[themoudie]

Very nice restoration Dave.

Pleased that you managed to post the image.

Good health, Bill

[Davescycles72]

Thanks guys, the nos lighting board is still giving me some issues. When I insert the igniting key,I don’t get full battery voltage to the coil. Not having the stock regulator I think is giving me the trouble. Nigel Lacy suggested running a switch wire from battery positive to coil,as electrex regulator works differently. When I do this it starts first kick. But I don’t understand where I am losing that volt and a half.