Page 1 of 1
NC Chain Guard attachments
Posted: Mon Jun 28, 2021 3:23 am
by halfpast
Would anyone happen to know the bolt sizes to attach the chain guard to the swingarm? There are two smaller ones towards the back of the bike and what looks like one larger close to the motor. This is a narrowcase 250 Diana. Thanks in advance.
Re: NC Chain Guard attachments
Posted: Mon Jun 28, 2021 6:33 am
by Bob_Matthews
All 3 are M6 on my Elite.
Re: NC Chain Guard attachments
Posted: Mon Jun 28, 2021 10:29 am
by Geordie
M6 standard thread on my Mototrans Elite too.
Re: NC Chain Guard attachments
Posted: Mon Jun 28, 2021 11:26 am
by Blaine.Hale
M6 x 1.0 on most of the bike, honestly. I used them on all the body work, chain guard, swing arm pinch bolts, engine covers etc. I don't recall the specific lengths for all of them but Home Depot had them. Just rough estimate and pick up a bunch of M6s with lock washers.