Ducati 450 tank cap

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Rossguzzi
Posts: 46
Joined: Wed Nov 20, 2019 12:29 pm

Ducati 450 tank cap

Postby Rossguzzi » Sat Apr 24, 2021 11:14 am

fuel filler cap.jpg

Has anyone bought one of these replica caps and had trouble fitting it ?
Cheers.
You do not have the required permissions to view the files attached to this post.
6 Ducati`s, 6 Guzzi`s, 2 Aprilia`s, 4 Morini`s, 2 Montessa`s and a bunch of other stuff

A.I.M
Posts: 81
Joined: Wed Jan 01, 2020 3:39 pm
Location: Pyrenees-Orientales, France

Re: Ducati 450 tank cap

Postby A.I.M » Sun Apr 25, 2021 12:26 pm

Hi Ross,
I bought one from Ducati Vintage Store for my 250 SCR and fitted it no trouble at all, very straightforward.
Petrol tank restored w cap wings.jpg


Regards,
Al
You do not have the required permissions to view the files attached to this post.

Geordie
Posts: 141
Joined: Thu Jan 16, 2020 12:15 pm
Location: Mallorca, Spain

Re: Ducati 450 tank cap

Postby Geordie » Sun Apr 25, 2021 8:19 pm

The wire is a spring. The seal ring is adjustable for height/pressure.
You do not have the required permissions to view the files attached to this post.

Rossguzzi
Posts: 46
Joined: Wed Nov 20, 2019 12:29 pm

Re: Ducati 450 tank cap

Postby Rossguzzi » Mon Apr 26, 2021 8:32 am

The wire on mine only just reached the location hole. That was after carefully clearing the groove it sits in. Had to re bend it a little. Still not totally happy with it. Had to shorten the locking tabs too. Also bend them a little. On the tank I had to grind the start of the locking ramp so the tabs would ride up them.
I am going to try and get some spring wire and bend up a new one.
Just thought this may help someone else.
Cheers.
6 Ducati`s, 6 Guzzi`s, 2 Aprilia`s, 4 Morini`s, 2 Montessa`s and a bunch of other stuff

Rossguzzi
Posts: 46
Joined: Wed Nov 20, 2019 12:29 pm

Re: Ducati 450 tank cap

Postby Rossguzzi » Mon Apr 26, 2021 2:50 pm

cap.jpg
You do not have the required permissions to view the files attached to this post.
6 Ducati`s, 6 Guzzi`s, 2 Aprilia`s, 4 Morini`s, 2 Montessa`s and a bunch of other stuff

Rossguzzi
Posts: 46
Joined: Wed Nov 20, 2019 12:29 pm

Re: Ducati 450 tank cap

Postby Rossguzzi » Fri May 07, 2021 5:50 am

If anyone has an old cap that they dont use, I would be interested in the spring clip.
It is harder than you think to make one. :(
Cheers.
6 Ducati`s, 6 Guzzi`s, 2 Aprilia`s, 4 Morini`s, 2 Montessa`s and a bunch of other stuff

Duccout
Posts: 1285
Joined: Wed Feb 05, 2020 1:20 pm
Location: Essex UK

Re: Ducati 450 tank cap

Postby Duccout » Fri May 07, 2021 1:58 pm

I bought a stainless replica of the 70's flip-up cap (probably Indian made) and the spring plate was just a bit of crudely bent steel, making the button very difficult to open. I had to take the spring plate out of the original (Italian-made) cap and fit that to the replacement before it was useable.


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 38 guests