Motoscrubs.com

Hi,

I am looking for a repair kit for my rear shocks.

I have completely dismantled the parts and found out that one shock absorber was totally dry without any oil and the other had a broken spring.

Which parts should I have to change? I know that I need at least new rubbers, washers and springs. Where can I get them?

If somebody has spare parts shocks please feel free to offer it. Maybe this is the easier way.

I saw a revision kit on the ducati vintage site for a Ø 10mm stalk steel . Can I use it for my existing stalk steel with Ø 9mm too?

Cheers, Ralf

Hi Ralf,

Have you tried Andy at DESMO?

Colin

Hi Ralf

just get the kit from the Ducati vintage store . you have to cut the shock tops off
and tap M7 in them in order to fit the new shafts .

Eldert

Hi,

I have contacted Desmo and actually I am waiting for a reply.
In parallel I ordered the kit from Ducati Vintage. This solution sounds not to bad.

Thanks Duccout and Eldert for your replies!

Ralf

Good luck with the job, let us know how you get on.

Colin