Mach1 ---Mark 3 NC Front guard (fender!)

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Bevel bob
Posts: 1043
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Mach1 ---Mark 3 NC Front guard (fender!)

Postby Bevel bob » Fri Feb 12, 2021 11:22 am

Have to do something , so going to remove the raised front lip of my Mark 3 guard ( Bennelli probably) . So how far in front of the forks should the guard be? , Looking at period photos the guard should finish a little forward of the hub spoke flange and the side edge should line up to the front edge of the brake plate. The curve of the cut appears to vary ,different suppliers?.

Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: Google [Bot] and 30 guests