Page 1 of 1
450 frame bracing
Posted: Sun Sep 20, 2020 8:17 am
by Rossguzzi
Hi,
Im wondering if anyone could post some close up pics of the frame bracing found behind the motor on the down tubes. Especially where it meets the top tube.
Restoring a 450 Scrambler.
Cheers.
Re: 450 frame bracing
Posted: Sun Sep 20, 2020 9:02 am
by themoudie
Morning Rossguzzi,
All being well I'll send some of the gusseting on a 450MKIII frame that I believe is the same as the Scrambler apart from the seat loop by the end of this morning. Are you wanting dimensions as well?
I can PM them if you would prefer via 'WeTransfer'?
Bill
Re: 450 frame bracing
Posted: Sun Sep 20, 2020 12:40 pm
by themoudie
Aye Rossguzzi,
Larger resolution and different angles available is you PM me with your email.
Re: 450 frame bracing
Posted: Sun Sep 20, 2020 12:44 pm
by themoudie
Aye Rossguzzi,
Dimensioned 'rough' sketch drawings of the gusseting. I hope they make sense.
Use with images in previous post to forum.
Good health, Bill
Re: 450 frame bracing
Posted: Mon Sep 21, 2020 4:35 am
by Rossguzzi
Hi Bill,
That is fantastic. I did not realise they extended up the frame so far.
If you like you can email me
rbannister59@gmail.comReally appreciate it.
Regards,
Ross.
Re: 450 frame bracing
Posted: Mon Sep 21, 2020 8:57 am
by themoudie
Aye Ross,
I have WeTransferred all of the image files across to you, so that they don't clutter up your email account. Pleased they are of use
Good health, Bill