Page 4 of 4
Re: 350 scrambler
Posted: Thu Sep 10, 2020 1:10 pm
by Dave L
350 engine from a low mileage crashed bike (Forza?). Comes c/w electric start and/or kickstart cover. Gear lever available. Rear hub components available except for 24hrs style plate.
Re: 350 scrambler
Posted: Thu Sep 10, 2020 1:11 pm
by Dave L
Please submit email addresses if you are interested, cheers,Dave
Re: 350 scrambler
Posted: Thu Sep 10, 2020 3:37 pm
by Duccout
Hi Dave,
Yes I am interested in the gear lever. My email is
colin.martin20@outlook.comThanks,
Colin
Re: 350 scrambler
Posted: Fri Sep 11, 2020 10:10 pm
by Lost Soul
Hi
Daveperkins@hotmail.co.ukWhole engine
Cheers
Dave
Re: 350 scrambler
Posted: Sat Sep 12, 2020 7:51 am
by Jon Pegler
Dave, (Lost Soul)
Note that the motor for sale is a late Forza motor with the electric start behind the cylinder barrel.
That motor has the long crankshaft and has to be used with the LH electric start cover.
It will not easily fit into a Scrambler frame.
Jon
Re: 350 scrambler
Posted: Sat Sep 12, 2020 3:30 pm
by Lost Soul
Hi Jon
Thanks for the info.
PM you
Cheers
Dave
Re: 350 scrambler
Posted: Wed Sep 16, 2020 11:04 am
by Dave L
Behold, an S
Re: 350 scrambler
Posted: Wed Sep 16, 2020 12:05 pm
by Dave L
I know it’s not a 5 but at least it’s an S
Re: 350 scrambler
Posted: Wed Sep 16, 2020 12:10 pm
by Jon Pegler
An S head would usually have been fitted to a 200 Elite motor.
It is a good head to fit as it has the 37mm inlet valve and 35mm exhaust valve.
Some of these heads may well have ended up on late Road models as Mototrans were using up all their remaining narrowcase spares at that time.
Jon