Gear Lever

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Duccout
Posts: 1285
Joined: Wed Feb 05, 2020 1:20 pm
Location: Essex UK

Gear Lever

Postby Duccout » Tue Mar 17, 2020 4:25 pm

Does anyone know if there is a gear lever from another bike that will fit Ducati singles?

ecurbruce
Posts: 299
Joined: Fri Apr 01, 2011 12:43 am
Location: Lakeland fl

Re: Gear Lever

Postby ecurbruce » Tue Mar 17, 2020 4:32 pm


Duccout
Posts: 1285
Joined: Wed Feb 05, 2020 1:20 pm
Location: Essex UK

Re: Gear Lever

Postby Duccout » Tue Mar 17, 2020 5:08 pm

Thanks, but I'm looking for a replacement for the standard forward-mounted gear lever and I'm wondering if anyone discovered another make that would fit?

Bevel bob
Posts: 1042
Joined: Thu Apr 15, 2010 8:01 am
Location: Bromley Kent UK.

Re: Gear Lever

Postby Bevel bob » Tue Mar 17, 2020 7:42 pm

Why not use an original,? too heavy? I have a spare rocking pedal.

Duccout
Posts: 1285
Joined: Wed Feb 05, 2020 1:20 pm
Location: Essex UK

Re: Gear Lever

Postby Duccout » Tue Mar 17, 2020 7:45 pm

No! Too expensive. I have a rocking pedal but want to change to a a normal forward lever.

graeme
Posts: 938
Joined: Sun Mar 25, 2012 12:00 am
Location: Tasmania Australia

Re: Gear Lever

Postby graeme » Tue Mar 17, 2020 8:43 pm

The parallel twin lever fits. I have one on my wide case Scrambler

Graeme

Duccout
Posts: 1285
Joined: Wed Feb 05, 2020 1:20 pm
Location: Essex UK

Re: Gear Lever

Postby Duccout » Tue Mar 17, 2020 9:21 pm

Thanks. I think that I may have found some cheap Chinese ones that will fit.

Jordan
Posts: 1380
Joined: Fri Dec 24, 2010 11:29 am

Re: Gear Lever

Postby Jordan » Wed Mar 18, 2020 10:00 pm

Duccout wrote: I may have found some cheap Chinese ones that will fit.


Please let us know if they do.

Duccout
Posts: 1285
Joined: Wed Feb 05, 2020 1:20 pm
Location: Essex UK

Re: Gear Lever

Postby Duccout » Thu Mar 19, 2020 4:22 pm

The spline on the singles shaft is the same as that found on the modern Ducatis ( pre Panigale, at least) and on eBay there are various reversed gear levers for sale to fit them, so they will fit singles as well. May not look very vintage but hey, for around £10......


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: No registered users and 40 guests