Forza base gasket query

Ducati single cylinder motorcycle questions and discussions, all models. Ducati single cylinder motorcycle-related content only! Email subscription available.
Moderator: Morpheus

Moderator: ajleone

Dave L
Posts: 93
Joined: Mon May 14, 2018 10:31 am
Location: Mallorca

Forza base gasket query

Postby Dave L » Sun Dec 22, 2019 8:08 am

There is an aluminium base gasket sandwiched between two fibre gaskets on my Forza. The gasket is about 1 mm thick. Is this nescessary for the rebuild? Does it lower the compression slightly?

Jordan
Posts: 1380
Joined: Fri Dec 24, 2010 11:29 am

Re: Forza base gasket query

Postby Jordan » Sun Dec 22, 2019 9:47 am

I don't know about the Forza, but I have seen 2mm thick aluminium base spacer on a Ducati.
I seem to remember it was a SCR model widecase, and I am under the impression it was to lower compression.
It's an advantage of bevel camshaft drives that it is easy to adjust compression ratios this way, compared to other OHC systems.

blethermaskite
Posts: 477
Joined: Thu Mar 01, 2018 1:06 am
Location: northern ireland

Re: Forza base gasket query

Postby blethermaskite » Sun Dec 22, 2019 10:25 am

Its a compression adjustment plate.
Cheers,
George

Dave L
Posts: 93
Joined: Mon May 14, 2018 10:31 am
Location: Mallorca

Re: Forza base gasket query

Postby Dave L » Tue Dec 24, 2019 10:40 am

If I left it out would the bike have more power/torque? Is this too simplistic a theory?

blethermaskite
Posts: 477
Joined: Thu Mar 01, 2018 1:06 am
Location: northern ireland

Re: Forza base gasket query

Postby blethermaskite » Tue Dec 24, 2019 11:07 am

I doubt if you would notice any difference, It has more to do with petrol quality/octane rating.
Cheers,
George


Return to “Ducati Singles Main Discussions (& How to Join)”

Who is online

Users browsing this forum: IanHood and 55 guests