Fork Dampener Assembly

[blaat!]

Somebody got new fork tubes! Now, for the life of me I can't remember which way the dampener assembly goes in. Do the pictures below look like the correct order and orientation?

IMG_0785.jpg

IMG_0784.jpg

IMG_0783.jpg

Thanks!
Jim

[Scottish888]

Hi Jim,

If they are Marzocchi 35mm 1974 era then check out my post on Marzocchi, I have a pic with the damper valve in the order it was removed.

Regards,

Alex

[blaat!]

Thanks Alex, but they are the standard 31.5mm type from a mid ‘60s narrow case. The service manual doesn’t show which way they go.

[DBDBrian]

Hi Jim
These are pictures I took when I stripped my N/C forks quite awhile back, and they have yet to be re-assembled, but I can't think I would not have laid them out in the correct sequence.
Hope this helps.

P1060382.JPG

P1060386.JPG

[blaat!]

Yes sir. Confirms what I thought.

I think I made a picture like this when I took them apart several years ago, but I can’t seem to find it.

Thanks for posting these Brian!