Ducati MK3 stainless steel spokes

[Scottish888]

Hi Folks, any recommendations for Ducati MK3 stainless steel spokes?
I would keep my original steels on but a few look a bit thin in places due to corrosion, if you magnify the pic you can see some of the spokes are quite thin near the rim.

a_edited.jpg

[ranton_rambler]

Got my spokes from Central Wheels in Birmingham.

[themoudie]

Aye Alex, Central Wheels and if you make a Horlicks of it they will "Re-true" it for you for a reasonable price plus P&P.

Regards, Bill

[Scottish888]

Thanks Folks,

I will send them a sample spoke as they have a few options.
The spoke nipples on the Ducati look like they are brass...not sure but they don't rust.

Regards,

Alex

[ducwiz]

You have to send 2 spokes, one inner and one outer. They are slightly different in length and bending angle.

cheers Hans

[Scottish888]

Thanks Hans, I had forgot about that!

[Scottish888]

Are the spokes the same lengths front and rear?
Are the hubs the same external diameter?

Regards,

Alex

[Scottish888]

.

[Eldert]

Are the spokes the same lengths front and rear?
Are the hubs the same external diameter?

Regards,

Alex

spokes are not the same length front and rear .

i think your rear rim is 18 inch and front 19 inch .

rear spokes are 155 mm from memory .

Eldert

[Scottish888]

Thanks Eldert,

I thought I could avoid stripping both wheels at the same time but best I do that to get it right.

Regards,

Alex